Please note that there are price breaks per pound, the more that you get. Unless otherwise specified, the prices are, from left to right, the 1lb, 5lb, 10lb and 20 lb prices. See the Shipping Rates for more info. All the chemicals listed on this page (in blue) require a DOT-E-8249  Exemption box (see shipping rates for details)

The last thing listed behind the stock number is the hazardous class, if any, of the item. The Shipping class Legend follows. If any of these are listed after a chemical, that chemical is hazardous, but some of them may be shipped as a limited quantity with no hazmat. Those that can are as listed below in the color coding.

DW=Dangerous When Wet; SC=Spontaneously Combustible;
OX=Oxidizer; FS=Flammable Solid; FL=Flammable Liquid; PM=Poisonous Material;
CM=Corrosive Material; AG=Aerosol Gas; ORM=ORM-D (cannot be shipped with other hazmat items, but is not hazardous itself)

For our safety as well as yours, we ship everything according to regulations. The DOT has no sense of humor!

Note: For instructions on using the shopping cart, click here.

Color Coding:
Green - means that particular item is not considered hazardous. However, items that are listed as ORM-D CANNOT be shipped to other countries (no international shipping). E-mail us if you have a question on a partcular item. ORM-D's are not considered hazardous by ground service.
Orange - means the item is normally hazardous, but we can ship it without a hazmat fee (in 1LB quanities, up to 10LBs, at 1LB price)
Red - means that the item must be shipped hazardously, regardless of qty ordered.
Blue - require a DOT-E-8249 Exemption box and hazardous fees.

<==============================>
If you are placing an order with us online, you must be on file with us, regardless of what your first order is. This means that we have to have a signed in ink order form and a copy of your driver's license on file. If you do not have these things on file with us, it will just delay your order. You only have to do it once and then you can order whenever you would like. Go to our order form page to print out the order form there. Then you can use that to fill out and send in.
<==============================>

For the MSDS information buttons, please realize these may or may not be the same ones that come with your order. We have them included here for your convenience and they are pulled from the internet, not necessarily from the manufacturer that we get the material from.

If at any time you want to review your order so far, please click below.

Iron Oxide black, medium, 30% - 325 mesh - Stock #C150
Excellent granulation for thermites and adds "crackle" to formulations such as fountains, thermic ignition comps/primes, ignition cord, etc.
    

Iron Oxide red, microfine, -325 mesh - combustion catalyst - Stock #C150A
Acts as a high temp oxidizer as well as increasing heat in compositions such as primes.
    

Iron Powder - -325 mesh - for orange/yellow sparks - Stock #C150A1
    

Iron Powder - -100 mesh - for orange/yellow sparks - Stock #C150A2
    

Isonate 143L (Diphenylmethane 4,4 Diisocyanate) - High speed HTPB curative - Stock #C150B - ORM
Room tempurature curative.
    

Isophorone Diisocyanate - curative, isocyanate - HTPB curative -Stock #C150C - ORM
Heat is generllay required for fast cures.
    

Lactose - milk sugar, fine powder, fuel in smoke comps - Stock #C152
    

Lampblack (Carbon black) - microfine powder - Stock #C154 - ORM
    

Lampblack - conductive (carbon black) - microfine - Stock #C154C - ORM
    

Lead Dioxide (lead peroxide), for primers, igniters, etc. - Stock #C155 - OX
    

Lead Tetraoxide, Red - prime, delay, crackling microstars, thermalite, etc. - Stock #C157

    

Lecithin - propellant processing aid, viscosity reducer - Stock #C1571
.75-1% added to composite propellants to reduce viscosity for mixing.
    

Linseed Oil - moistureproof binder, coating for Mag. - Stock #C157B
    

Lithium Chloride, anhydrous - Stock #C157LC
For red flames