Note: For instructions on using the shopping cart, click here.
Color Coding:
Green - means that particular item is not
hazardous whatsoever.
Orange - means that item is normally
hazardous, but we can ship it without a hazmat fee (you must pay the 1 lb price for it
though)
Red - means that the item must be shipped
hazardously, regardless of qty ordered.
If you are placing an order with us online, you must
be on file with us, regardless of what your first order is. This means that we have
to have a signed in ink order form and a copy of your driver's license on file. If you do
not have these things on file with us, it will just delay your order. You only have to do
it once and then you can order whenever you would like. Go to our order form page to print
out the order form there. Then you can use that to fill out
and send in.
If at any time you want to review your
order so far, please click below
NOTE: ANY OF THE FOLLOWING THAT ARE 12" IN LENGTH
OR GREATER MAY NOT BE SHIPPED WITH HAZARDOUS MATERIALS BECAUSE OF BOX SIZE RESTRICTIONS.
SPIRAL WOUND, KRAFT PAPER TUBES We must comply with a federal ruling that states any person ordering paper tubes 10" long or shorter must have an ATFE manufacturing permit to order.
Please note: The tubes are in quantities of 50. This means that if you want to
order 250 of them, you need to enter a qty of 5, not 250. Also, please note that
the 5/16" ID through the 5/8" ID tubes do not come in qty's of 50 - so don't
order 1 qty of them.
Note: We are discontinuing the dull silver outwraps on our
general purpose tubes. The silver wrap will be replaced with dull black to
accomodate our theatrical stage effects friends who require their use on dim-lit
stages and other similar uses.
STOCK #
|
DESCRIPTION |
50 |
100 |
250 |
500 |
1000 |
SHIP
WT |
T516RS
|
5/16" ID X 1 3/4" LONG X 3/64" WALL
(RED & SILVER MIXED COLORS) Bottle rockets, Crackers, Chasers, Inserts, pull string igniters
|
N/A |
$8.60 |
$17.25 |
$34.50 |
$58.65 |
6oz/100 |
T516BY
|
5/16" ID X 12" LONG X 3/64" WALL
(CANARY YELLOW & BLACK) Bottle rockets, Crackers, Chasers, Inserts, Pull string igniters, large lance tubes, etc. Cut to length.
No ATFE required to order this length of tube
|
$19.00/50 |
------- |
------- |
------- |
------- |
6oz/50 |
T38M
|
3/8" ID X 2" LONG X 1/16" WALL
(MIXED COLORS) Bottle rockets, Crackers, Chasers, Inserts, Smokes, Whistles
, etc.. |
N/A |
$10.10 |
$20.15 |
$40.25 |
$68.45 |
6oz/100 |
T38M12
|
3/8" ID X 12" LONG X 1/16" WALL
(MIXED COLORS) Bottle rockets, Crackers, Chasers, Inserts, Smokes, Whistles, etc.. Cut to length.
No ATFE required to order this length of tube
|
/50 |
------ |
------ |
------ |
------ |
10oz/50 |
T112R
|
1/2" ID X 1 1/2" LONG X 1/16" WALL
(RED COLORED) #00 Shell, Signal Lights, Smoke devices, Aerial flares, Smoke
stars, Go-Getters, Box stars, Strobe lights, Proximity FX
|
N/A |
$8.60 |
$17.25 |
$34.50 |
$65.55 |
8oz/100 |
T112S
|
1/2" ID X 1 1/2" LONG X 1/16" WALL
(SILVER COLORED) #00 Shell, Signal Lights, Smoke devices, Aerial flares, Smoke
stars, Go-Getters, Box stars, Strobe lights, Proximity FX
|
N/A |
$8.60 |
$17.25 |
$34.50 |
$65.55 |
8oz/100 |
T112Y12
|
1/2" ID X 12" LONG X 1/16" WALL
(CANARY YELLOW) Cut to length for #00 shell, signal lights, smoke, aerial flares, and rodent control/bird scare devices, go-getters, box stars, strobes, proximite FX, etc.. No ATFE required to purchase this length of tube
|
temp out |
|
$ |
$ |
$ |
/50 |
TM80B
|
9/16" ID X 1 1/2" LONG X 1/16" WALL
(BLACK COLORED) #0 Aerial Shell (loose fit), Signal Lights, Smoke devices, Aerial flares, Smoke
stars, Go-Getters, Box stars, Strobe lights, Proximity FX, Whistles
|
N/A |
$10.10 |
$20.15 |
$40.25 |
$68.45 |
10oz/100 |
T214R
|
9/16" ID X 2 1/4" LONG X 3/32" WALL
(RED COLORED) #0 Aerial, heavy wall (snug fit), Fountain Tube, Whistle tube ,
Signal Lights, Smoke devices, Flares, Repeaters, Strobe lights, Proximity FX
.
|
N/A |
|
|
|
|
10oz/100 |
T916/Y
|
9/16" ID X 13 1/2" LONG X 3/32" WALL
(YELLOW COLORED) #0 Aerial, heavy wall (snug fit), Fountain Tube, Whistle tube (fits TSWHIST tool set cut into 6 pcs),
Signal Lights, Smoke devices, Flares, Repeaters, Strobe lights, Proximity FX. Cut to desired lengths. No ATFE required to purchase this length of tube |
/50 |
------- |
------- |
------- |
------- |
|
T5/8UCKBN |
5/8" ID X 24" LONG X 1/16" WALL
(Natural Brown Colored) Thin wall for rains, waterfalls, torches, etc.. Thin wall allows tube to burn down as comp burn. Less expensive
Natural Kraft color for shell inserts, etc.
No ATFE required to purchase this length of tube |
|
T5/8B12 |
5/8" ID X 12" LONG X 1/16" WALL
(BLACK COLORED) #0 Aerial shell (snug fit), Signal Lights, Smoke devices, Aerial flares, Smoke
stars, Go-Getters, Box stars, Strobe lights, Proximity FX. Dull black
outer for non-glare use in dim lighted special effects stage work and
other similar uses
. No ATFE required to purchase this length of tube |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T5/8B
|
5/8" ID X 1 3/4" LONG X 1/16" WALL
(BLACK COLORED) #0 Aerial shell (snug fit), Signal Lights, Smoke devices, Aerial flares, Smoke
stars, Go-Getters, Box stars, Strobe lights, Proximity FX. Dull black
outer for non-glare use in dim lighted special effects stage work and
other similar uses
. |
N/A |
$12.20 |
$24.45
|
$48.90
|
$84.80
|
12oz/100 |
T21234R
|
3/4" ID X 2 1/2" LONG X 1/8" WALL
(RED COLORED) #0 Repeater tube, Flares, Fountains, Smoke, Candles, Strobe
lights, Proximity FX, Inserts, Spinners, Torch
CLOSEOUT PRICE, while they last |
$11.80 |
$21.85 |
$43.75 |
$82.50 |
$165.00 |
18oz/50 |
T21234S
|
3/4" ID X 2 1/2" LONG X 1/8" WALL
(SILVER COLORED) #0 Repeater tube, Flares, Fountains, Smoke, Candles, Strobe
lights, Proximity FX, Inserts, Spinners, Torch
CLOSEOUT PRICE, while they last |
$11.80 |
|
$43.75 |
$82.50 |
$165.00 |
18oz/50 |
T3/4UCB
|
3/4" ID X 24" LONG X 3/32" WALL
(BLACK COLORED) #0 Repeater Tube, #0 Mortar, Flares, Fountains, Smoke,
Repeater tube, Candles, Strobe lights, Proximity FX, Inserts, Spinners,
Torch. Cut to length.
No ATFE required to purchase this length of tube |
|
|
|
|
|
|
T312M
|
3/4" ID X 3 1/2" LONG X 3/32" WALL
(MIXED COLORS) #0 Repeater Tube, #0 Mortar, Flares, Fountains, Smoke,
Repeater tube, Candles, Strobe lights, Proximity FX, Inserts, Spinners,
Torch
CLOSEOUT PRICE, while they last
|
$11.80 |
$21.85 |
$43.75 |
$82.50 |
$165.00 |
18oz/50 |
T600R
|
3/4" ID X 6" LONG X 1/8" WALL
(RED COLORED) #0 Mortar, Repeater, Torch, Flares, Candles, Proximity FX,
Smoke, Fountain CLOSEOUT PRICE, while they last
|
$24.30 |
$45.30 |
$90.00 |
$173.00 |
$346.00 |
2 1/2 lbs/50 |
T212R
|
1" ID X 2 1/2" LONG X 1/8" WALL
(RED COLORED) #2 Heavy Aerial tube, Proximity FX, Smoke, Strobe light,
Spinner, Fountain
CLOSEOUT PRICE, while they last |
$13.15 |
$24.25 |
$48.75 |
$91.25 |
----- |
1 1/2 lbs/50 |
T212S
|
1" ID X 2 1/2" LONG X 1/8" WALL
(SILVER COLORED) #2 Heavy Aerial tube, Proximity FX, Smoke, Strobe light,
Spinner, Fountain CLOSEOUT PRICE, while they last
|
$14.00 |
$25.95 |
$52.75 |
$99.25 |
----- |
1 1/2 lbs/50 |
T12/1Y
|
1" ID X 12" LONG X 1/8" WALL
(CANARY YELLOW COLORED) #2 Heavy Aerial tube, Proximity FX, Smoke, Strobe light,
Spinner, Fountains.
Cut to length. No ATFE required to purchase this length of tube |
|
|
|
|
|
|
T12/114B
|
1 1/4" ID X 12" LONG X 3/32" WALL
(BLACK OUTER COLOR) Cut into 2" lengths for #3 aerial shells, cut into 6" length for #2 mortar, fountains, smoke, proximite FX, strobe, etc. No ATFE required to purchase this length of tube
|
|
|
|
|
|
|
SPIRAL WOUND - UNCUT 24" LONG (wall thickness as specified)
No ATFE required to order paper plugs, paper caps, paper discs, paper cup sets or tubes longer than 10"
STOCK # |
DESCRIPTION |
PRICE/DOZEN |
SHIP WT |
T5/8UCKB |
5/8" ID X 24" LONG X 1/16" WALL (Natural Kraft Brown Colored)
Thin walls for falls, rains, torches, etc.. Cut to desired lengths
|
|
|
T3/4UCB |
3/4" ID X 24" LONG X 3/32" WALL (BLACK COLORED)
Cut to length for # 0 mortar tube - 4" to 7" long - fits TB3/4 plastic base
|
|
|
T1UCR |
1" ID X 24" LONG X 1/8" WALL (RED
COLORED) |
$19.75/DOZ |
3 LBS/DOZ |
T114UCR |
1 1/4" ID X 24" LONG X 1/8" WALL (RED
COLORED)
Cut to length for # 2 mortar tube - 6" to 8" long - fits TB114 plastic base
|
$22.55/DOZ |
3 LBS/DOZ |
T114UCS
|
1 1/4" ID X 24" LONG X
1/8" WALL (SILVER COLORED) - limited |
$22.55/DOZ |
3 LBS/DOZ |
T112UCR |
1 1/2" ID X 24" LONG X 1/8" WALL (RED
COLORED)
Cut to length for # 3 mortar tube - 8" to 10" long
|
$27.60/DOZ |
4 LBS/DOZ |
COLOR LANCE TUBES
High quality waxed water repellant paper lance tubes closed at one end with color outerwrap. Make your own pictures in color fire or "Fireart". Sold per color in bundles of 50. Color lance compositions burn slowly and therefore usually employ ammonium perchlorate as the main oxidizer.
|
RED |
4.3125" LONG X .345" ID X .350" OD Waxed paper tubes |
$8.75/50 (8oz) |
|
WHITE |
4.3125" LONG X .345" ID X .350" OD Waxed paper tubes |
$8.75/50 (8oz) |
|
BLUE |
4.3125" LONG X .345" ID X .350" OD Waxed paper tubes |
$8.75/50 (8oz) |
|
YELLOW |
4.3125" LONG X .345" ID X .350" OD Waxed paper tubes |
$8.75/50 (8oz) |
|
GREEN |
4.3125" LONG X .345" ID X .350" OD Waxed paper tubes |
$8.75/50 (8oz) |
PAPER CUP SETS
No ATFE required to order paper plugs, paper caps, paper discs, paper cup sets or tubes longer than 10"
STOCK # |
DESCRIPTION |
250 SETS |
1000 SETS |
SHIP WT |
CS3/4 |
3/4" DIAMETER - 3cc VOLUME |
$24.50 |
$96.00 |
20oz/250 SETS |
CS1 |
1" DIAMETER - 10cc VOLUME |
$28.00 |
$110.00 |
1 1/2 LBS/250 SETS |
Sodium Silicate [Na2O• 2SiO2] (water glass) - heavy, clear syrup, adhesive, fire retardant - Stock #C186
This is the fast drying adhesive used to coat the cup set devices above. Simply fill with composition, insert fuse, dip in sodium silicate and roll in fine sawdust. One or two applications is all that is needed. Can be colored with food colorings. Can also be used to make rock hard tubes by applying a thin coat to the paper as the tube is rolled.
PAPER END PLUGS
Please note: Plugs are in quantities of 100. This means that if you would like
to order 2000 of them, you need to enter a qty of 20, not 2000.
No ATFE required to order paper plugs, paper caps, paper discs, paper cup sets or tubes longer than 10"
STOCK # |
DESCRIPTION |
100 |
200 |
500 |
1000 |
SHIP WT |
P516 |
5/16" END PLUGS |
N/A |
$8.40 |
$17.95 |
$32.85 |
1oz/100 |
P3/8 |
3/8" END PLUGS |
N/A |
$8.40 |
$17.95 |
$32.85 |
1oz/100 |
P1/2 |
1/2" END PLUGS |
N/A |
$8.40 |
$17.95 |
$32.85 |
1oz/100 |
P916 |
9/16" END PLUGS |
N/A |
$11.45 |
$22.80 |
$33.30 |
1oz/100 |
P5/8 |
5/8" END PLUGS |
N/A |
$12.60 |
$26.40 |
$35.95 |
1oz/100 |
P3/4 |
3/4" END PLUGS |
$6.20 |
$11.75 |
$25.50 |
$49.15 |
2oz/100 |
P1 |
1" END PLUGS |
$6.20 |
$11.75 |
$25.50 |
$49.15 |
3oz/100 |
P118 |
1 1/8" END PLUGS
currently not in stock |
$6.90 |
$13.20 |
$30.00 |
$49.15 |
3oz/100 |
P114 |
1 1/4" END PLUGS |
$7.40 |
$13.85 |
$30.00 |
$56.20 |
4oz/100 |
P112 |
1 1/2" END PLUGS |
$8.40 |
$15.70 |
$34.35 |
$69.00 |
4oz/100 |
KRAFT PAPER END DISCS
Thick, strong kraft paper end discs for various applications. May be used inside tube or glued over the ends. Also used in casting composite and similar rocket propellants, delay and smoke grains, etc., to inhibit end grains, center coring spindles or in black powder motors to form the bulkhead and delay wells. Durable kraft paper stock may be treated with Firefox Fire Retardant for added protection against burn through such as treating discs in smoke cans so the vent does not erode. Can be "painted" on or parts may be dipped and dried.
D114 |
1 1/4" dia solid X .100" thick (37/38mm & M212 disc) |
$ 6.95/50 (6 ozs/50) |
|
1 1/4" dia X 3/32" center hole X .100" thick (1 1/4" fits 38mm phenolic rocket motor cases) |
|
D114/14 |
1 1/4" dia X 1/4" center hole X .100" thick (37/38mm & M212 time fuse disc) |
|
|
1 1/4" dia X 3/8" center hole X .100" thick |
|
D112 |
1 1/2" dia solid X .100" thick (1 1/2" fits 54mm phenolic rocket motor cases as well as 6 lb black powder rocket bulkhead and delay well assembly) |
$ 7.85/50 (6 ozs/50) |
|
1 3/4" dia solid X .100" thick (1 3/4" fits MT134 mortar tube, smoke cans, etc.. 1 1/2" also fits T112UCR tubes for smoke cans, etc., as well as 6 lb black powder rocket bulkhead and delay well assembly) |
$ 7.85/50 (6 ozs/50) |
D178/916 |
1 7/8" dia X 9/16" center hole X .100" thick |
$ 8.75/50 (6 ozs/50) |
D178/58 |
1 7/8" dia X 5/8" center hole X .100" thick |
$ 8.75/50 (6 ozs/50) |
D2 |
2" dia solid X .100" thick (2" dia fits inside Firefox Tactical Smoke Cans) |
$ 8.75/50 (8 ozs/50) |
D2/38 |
2" dia X 3/8" center hole X .100" thick (2" supplied with Firefox Tactical Smoke Kits) |
$ 8.75/50 (8 ozs/50) |
D2/716 |
2" dia X 7/16" center hole X .100" thick (2" supplied with Firefox Tactical Smoke Kits) |
$ 8.75/50 (8 ozs/50) |
D2/916 |
2" dia X 9/16" center hole X .100" thick (2" supplied with Firefox Tactical Smoke Kits) |
$ 8.75/50 (8 ozs/50) |
|
2 1/8" dia solid X .100" thick (2 1/8" fits on the outside end of tactical smoke cans) |
$ 8.75/50 (8 ozs/50) |
D214 |
2 1/4" dia solid X .100" thick |
$ 9.10/50 (8 ozs/50) |
D212 |
2 1/2" dia solid X .100" thick (3" aerial shell solid end disc) |
$11.90/50 (8 ozs/50) |
D212/14 |
2 1/2" dia X 1/4" center hole X .100" thick (3" aerial shell, 1/4" time fuse hole disc) |
$11.90/50 (8 ozs/50) |
|
3 1/2" dia solid X .100" thick (4" aerial shell solid end disc) |
$16.95/50 (12 ozs/50) |
D312/14 |
3 1/2" dia X 1/4" center hole X .100" thick (4" aerial shell, 1/4" time fuse hole disc) |
$16.95/50 (12 ozs/50) |
|
4 1/2" dia solid X .100" thick (5" aerial shell solid end disc) |
|
|
4 1/2" dia X 1/4" center hole X .100" thick (5" aerial shell, 1/4" time fuse hole disc) |
|
|
5 5/8" dia solid X .100" thick (6" aerial shell solid end disc) |
|
|
5 5/8" dia X 1/4" center hole X .100" thick (6" aerial shell, 1/4" time fuse hole disc) |
|
KRAFT PAPER FINISHING CAPS
These caps fit over the ends of the paper cans (Outside Diameter of can). No ATFE required to purchase
CP134
|
1 3/4" Paper caps fit 1 3/4" OD Tubes & Cans
(also fits discarded standard bathroom tissue & paper towell tubes - free tubes to make smoke cans, 2" mines, exploding targets & cannister aerial shells)
Simply plug bottom of tube with a disc cut from a cerael box or similar, using the tube as a pattern and cutting disk inside the drawn line. A drawing compass is a great way to draw perfectly round discs. Use a length of PVC pipe (or similar) that fits the inside of the tube to push the discs in. Apply glue (PVOH) inside and out, allow to dry and glue another disk in the bottom. Use plenty of glue. If making aerial shells or mines, punch a 1/4" hole in several discs glued together and glue the time fuse in place. Push it in place from the top to the bottom of tube using the PVC pipe. Glue in place and allow to dry. Add enough glue inside around fuse 1/8" thick and allow to dry upright. This step will reinforce the bottom to withstand the lift charge shock. Note; Before filling with composition, brush the inside of tube (with bottom discs glued in place) with Firefox Fire Retardant to discourage burning fallout or smoke can burnthrough. Discs can also be treated. Moisten with wheat paste and wrap 6 1/2" wide strip of kraft paper bag around tube (parallel). This leaves enough overlap to paste over end discs to close. Do so over the bottom disc, with or without time fuse, depending on application and glue the end cap on. Fill the tube with appropriate composition(s) or garnitures and close in the same manner. Apply more paste to outside and wrap on more kraft paper folding over the ends as before. The number of paper laps is just enough to effect a proper fit in the mortar tube. It should have 1/8" clearance on each side (1/4" total) for proper fit in mortar. They are fired from a 2" ID mortar. Smoke cans; Fuse can be added to the top end for smoke devices. Press moist smoke comp in place leaving a tapered core in the center to increase surface area of burn / smoke volume. Place a ring of glue around inside of tube and push a double disc punched with a 1/2" center hole in place leaving approx 1" of empty space from composition. Glue and dry. Fold paper strips over the edge and inside tube against discs to reinforce against pressure. Secure fuse in place with prime slurry and place an end cap over to finish. This cap is not glued in place and removed for use.
|
|
5 oz ship wt |
FIREFOX FIRE RETARDANT SOLUTION
Our fire retardant liquid is an extremely effective and inexpensive solution for burn through and live paper ember problems during combustion of the composition. It is applied by dipping or by brush. When dry, it effectively retards heat buildup and burn through of the paper casing. A must for fountain, gerb and smoke cans or any other application where heat buildup is a problem. Well tested and appraised by our professional manufacturer customers!
Stock # FIRERET $7.75 quart 3 lbs / qt ship wt
Polyvinyl Alcohol
PVA/PVOH adhesive, beads. Simply dissolve in boiling water. Similar to Elmer's glue but dries stronger and crystal clear. Great for gluing plugs and caps in place, wood plugs in mortars, etc.. This strength is 8 ozs PVOH in 1 quart boiling water. Can also be used as a water soluble binder in various pyrotechnic mixtures. Simply thin to a water-like viscosity for use here and use up to 4% in pyro mixture. Can be used with other water soluble binders to increase the strength of the dried casting. Use sparingly, too much will inhibit the burn rate. Can be used to make electric squibs (explosive electric match "hits") by dipping finished match head in concentrated solution twice, drying between coats. Very popular inexpensive adhesive!! 1 lb makes about 1 gallon
of thick adhesive. The thick glue may then be thinned with water for lower viscosities if needed.
Stock #C165D
$14.50/lb |
$68.75/5lb |
Special Sale $9.75/lb / 50 lb bulk bags
(60 lb ship wt) |
CP212
|
2 1/2" Paper Caps fit 2 1/2" OD
Tubes & Cans
(fits 3" star & salute cans)
|
$7.30/50
|
6oz ship wt
|
CP312
|
3 1/2" Paper Caps fit 3 1/2" OD
Tubes & Cans
(fits 4" star & salute cans)
|
$11.95/50
|
7oz ship wt
|
|
|
|
|
PARALLEL WOUND (CONVOLUTE) GENERIC TUBES - NATURAL KRAFT BROWN
Parallel wound tubes strong enough to sound like wood when struck together. These tubes are many times stronger than spiral wound @ the same thickness. Low cost natural brown kraft color. Wall thickness and subsequent OD's are nominal unless otherwise noted. No ATFE required to order paper plugs, paper caps, paper discs, paper cup sets or tubes longer than 10"
STOCK # |
DESCRIPTION |
PRICE |
SHIP WT |
GTP38
|
3/8" ID X 3 1/2" LONG X 3/32" WALL
Spollettes, falls, whistles, 2 oz rocket, shell inserts, ground chasers, etc..
|
$32.25/100 |
1 1/2 LBS/100 |
GTP38/24
|
3/8" ID X 24" LONG X 3/32" WALL
Spollettes, falls, whistles, 2 oz rocket, shell inserts, hummers, ground chasers, etc.. Cut to desired length.
No ATFE required to order this length tube
|
$19.85/25 |
4 LBS/25 |
GTP716
|
7/16" ID X 2 1/4" LONG X 3/16" WALL
Spollettes, falls, whistles, shell inserts, ground chasers, hummers, etc..
|
$23.00/100 |
2 LBS/100 |
GTP716/24
|
7/16" ID X 24" LONG X 3/16" WALL
Spollettes, falls, whistles, shell inserts, ground chasers, hummers, etc.. Cut to desired length.
No ATFE required to order this length tube
|
$23.85/25 |
8 LBS/25 |
GTP12
|
1/2" ID X 8 1/2" LONG X 1/8" WALL
Candles, 4 oz rocket, candle, buzz bomb, whistles, fountains, gerbs, hummers, shell inserts, etc..
|
$43.65/100 |
6 LBS/100 |
GTP12/24
|
1/2" ID X 24" LONG X 1/8" WALL
Candles, 4 oz rocket, candle, buzz bomb, whistles, gerbs, fountains, shell inserts, hummers, etc.. Cut to length.
No ATFE required to order this length tube
|
$22.25/25 |
5 LBS/25 |
GTP58/315
|
5/8" ID X 3 1/2" LONG X .105" WALL
Whistle rocket, hummer, gerbs, spinners, #00 mortar, shell inserts, etc.. Fits nose cones and fin sets RNCS & RFS for use with whistle rocket tool set #TSWROC.
|
$25.35/100 |
4 LBS/100 |
GTP58/24
|
5/8" ID X 24" LONG 9/64" WALL
8 oz rocket, candle, hummer, gerbs, whistle & strobe rockets, fountains, spinners, #00 mortar, shell inserts, tourbillion, etc.. Cut to length.
No ATFE required to order this length tube
|
$33.50/25 |
8 LBS/25 |
GTP34
|
3/4" ID X 8" LONG X 9/64" WALL
1 lb rocket, candle, gerbs, fountains, whistle & strobe rockets, tourbillion, #0 mortar, etc..
|
$63.20/100 |
10 LBS/100 |
GTP34/24
|
3/4" ID X 24" LONG X 9/64" WALL
1 lb rocket, candle, gerbs, fountains, whistle & strobe rockets, tourbillion, #0 mortar, etc.. Cut to desired length.
No ATFE required to order this length tube
|
$34.75/25 |
8 LBS/25 |
RE32 |
7/8" ID X 8" LONG X .1875" WALL X 1 1/4" OD
32oz rocket, whistle & strobe rockets, candle, gerbs, fountains, tourbillions.
|
$23.45/ 25 |
5 lbs/25 |
GTP78/24 |
7/8" ID X 24" LONG X .191" WALL X 1.260" OD
32oz rocket, whistle & strobe rockets, candle, gerbs, fountains, tourbillions. Cut to desired length.
No ATFE required to order this length tube
|
$38.00/ 25 |
8 LBS/25 |
RE48
|
1" ID X 10 1/4" LONG X 1/4" WALL
48oz rocket engine, whistle & strobe rockets, candle, gerbs, fountains, tourbillion, #1 mortar, etc..
No ATFE required to order this length tube |
$32.25/25 |
7 LBS/25 |
GTP1/24
|
1" ID X 24" LONG X 1/8" WALL
48oz rocket (thin, light wt wall), candle, gerbs, fountains, whistle & strobe rockets, tourbillion, #1 mortar, etc.. Cut to desired length.
No ATFE required to order this length tube
|
$33.75/25 |
8 LBS/25 |
KRAFT PAPER STOCK 40# WT, 18" WIDE X 1275 FT
Make your own high strength paper tubes and spherical star shells! Save money and enjoy the ultimate satisfaction of making your own tubes and shells from scratch. Our booklet "Making Professional Homemade Paper Tubes From Scrap Materials" (stock # TRTUBE) will help.
KRFT4018 |
Kraft Paper - 18" wide X 1275 ft long X 40# |
$67.00/roll (26 lbs) |
SHELL INSERT & SPECIAL PURPOSE TUBE CHART
Wall thicknesses and subsequent OD's listed are nominal. For low cost aerial shell inserts and general purpose use. Paper plugs to fit are located in the paper plugs section. Order plugs according to the tube ID. Sizes listed without pricing, we do not carry, however we list the information of size and use for your benefit. Other similar size tubes will also work or easily made on a tube forming mandrel. See our literature section for information on making your own tubes of all sizes. Tubes 10" long or shorter require an ATFE manufacturing permit to order. Those that do not require an ATFE are so listed.
Stock # |
ID |
Length |
Wall |
OD |
Example Use |
Price/wt |
|
5/16" |
12" |
3/64" |
.4061" |
Bottle rockets, crackers, chasers, pull string igniters, large lance tubes, etc. Cut to desired length. No ATFE required to purchase this length tube. |
$19.00/50 (6 ozs) |
|
3/8" |
1" |
1/16" |
1/2" |
Go-getters, bees, spinners, crackers, serpents, chasers, shell inserts, etc. |
$ 8.75/100 (1 lb) |
|
3/8" |
2" |
1/16" |
1/2" |
Go-getters, flying fish, bees, spinners, crackers, serpents, chasers, shell inserts, etc. |
$10.10/100 (8 ozs) |
|
7/16" |
24" |
3/16" |
.8125" |
Parallel wound, Spollette, hummers, fish, chasers, shell inserts, fountain, whistle, torch, gerb. No ATFE required to purchase this length tube. |
$23.85/25 (8 lbs) |
|
1/2" |
1" |
1/16" |
5/8" |
Go-getters, comets, box stars, bees, spinners, salutes, serpents, chasers, #00 aerial shell case, etc. |
|
|
1/2" |
1 1/2" |
1/16" |
5/8" |
Go-getters, comets, box stars, bees, spinners, salutes, serpents, chasers, #00 shell case, etc. |
$8.60/100 (8 ozs) |
|
9/16" |
1 1/2" |
1/16" |
.6875" |
#0 aerial shell case, go-getters, comets, box stars, bees, spinners, salutes, serpents, chasers, etc. |
$10.10/100 (10 ozs) |
|
5/8" |
1 3/4" |
1/16" |
3/4" |
Go-getters, comets, bees, spinners, salutes, etc. |
$12.20/100 (12 ozs) |
|
5/8" |
24" |
1/16" |
3/4" |
Waterfalls, rains, torches, flares, propellant liners, etc. Cut to desired lengths. No ATFE required to purchase this length tube. |
/doz |
|
1/14" |
12" |
3/32" |
1 7/16" |
Cut 2" long for #3 aerial shell (fits 1 1/2" # 3 mortar, cut 6" long for #2 mortar, fountains, strobes, smoke, proximite FX, etc. No ATFE required to purchase this length tube. |
|
IMPORTED PAPER BALL/SPHERICAL AERIAL SHELL CASINGS
By many requests, we have added genuine, quality, bio-degradable, paper
aerial shell sets. Priced per set - one set = two halves forming a round ball.
Simply glue the halves together after filling, string wrap (optional) and paste
strips of gummed kraft paper for strengh (use Fiber reinforced kraft tape for
superior strength). Imported - Call for current availability. No ATFE required to purchase.
IPB3
|
3" Paper Aerial Shell Set |
$ .95/set
|
3 oz/set
|
IPB4
|
4" Paper Aerial Shell Set
|
$ 1.90/set
|
4 oz/set
|
IPB5
|
5" Paper Aerial Shell Set
|
$ 2.80/set
|
5 oz/set
|
IPB6
|
6" Paper Aerial Shell Set
Currently out of stock
|
$ 4.65/set
|
8 oz/set
|
IPB8
|
8" Paper Aerial Shell Set
Currently out of stock
|
$10.80/set
|
2 lb/set
|
IPB10
|
10" Paper Aerial Shell Set
|
$19.65/set
|
2 lb/set
|
IPB12
|
12" Paper Aerial Shell Set
Currently out of stock
|
$27.60/set
|
3 lb/set
|
SMOKE CANISTER CASINGS
Made from strong Kraft paper stock designed specifically for use with smoke producing
compositions. They come with glue on end discs (two per casing). For applications of
higher combustion temps, they can be treated with fire retardant or lined with carbon
cloth to help prevent burn through. These are not wound with fire retardant paper. An ATFE manufacturing permit is required to order cans shorter than 10" long.
PROFESSIONAL SMOKE CAN FINISHING KIT
Finishing parts fitting the X-large smoke cans listed above (#SCCXL), you get enough parts to finish 12 devices. Parts list includes; 24 disc seating and securing rings, 12 solid bottom discs, 12 top discs with punched center hole/vent and 24 black color end caps to fit over each end of the case to finish the device. The bottom cap is glued in place, the top cap is not so it can be removed revealing the ignition means (fuse, pull string igniter, frictioin igniter - see special effects section). To make large tactical smoke devices, each of the 13 1/2" #SCCXL tubes is cut into three equal lengths. To finish 36 large tactical size devices (12 tubes, 13.5 ÷ 3 = 4.5" long, for 36 cans) you will need three of these finishing kits plus one dozen 13.5" #SCCXL tubes. Detailed assembly instructions with pictures included. Note; this is a parts set/finishing kit only. It does not include the compositions or ignition means.
Stock # SMKCANFIN
$18.75 72 piece parts set 8 oz ship weight / 72 pc kit
FIREFOX FIRE RETARDANT SOLUTION
Our fire retardant liquid is an extremely effective and inexpensive solution for burn through and live paper ember problems during combustion of the composition. It is applied by dipping or by brush. When dry, it effectively retards heat buildup and burn through of the paper casing. A must for fountain, gerb and smoke cans or any other application where heat buildup is a problem. Well tested and appraised by our professional manufacturer customers!
Stock # FIRERET
$7.75 quart 3 lbs / qt ship wt
MORTAR TUBES - CLASS C
ATFE manufacturing permit is required to order tubes 10" long or shorter
MT3/4 |
#0 3/4" ID X 3 1/2" long X 3/32" wall
patriotic colors
|
$7.00/25 |
1lb/25 |
Above Fits Tube Base #TB3/4 - aerial shell is tube
#TM80R and 9/16" plugs |
T12/114"B
|
#2 1 1/4" ID X 12" long X 3/32" wall Black
color - Currently out of stock
Cut in half (6" long) for use No ATFE required to order this length tube
|
$ |
|
Above Fits Tube Base #TB114
|
MT134 |
#4 1 3/4" ID X 10" long X 1/8" wall mixed
colors
|
$14.60/doz
|
1 1/2lb/doz |
Above Fits Tube Base #TB134 and uses aerial shell #4,
plastic #PSC134 or MA134 paper can |
CMT211 |
#5 2.095" ID X 10" long X .125" wall colored
|
$17.95/doz
|
1 1/2lb/doz |
Above Fits Tube Base #TB211 and uses aerial shell
#CSC5 - #5 canister shell |
CMT249
|
#100 2.490" ID X 14" long X .110 wall colored
No ATFE required to purchase this length of tube
|
$27.70/doz
|
2lb/doz |
Above Fits Tube Base #TB249 and uses aerial shell
#SSC100 - #100 spherical shell |
AERIAL SHELL CASINGS - CLASS C
TM80B
|
#0 Aerial Shell (loose fit in 3/4" ID tube)
9/16" ID X 1 1/2" Long X 1/16" Wall, Red
ATFE manufacturing permit required to purchase
Fits #MT3/4, T600R and other 3/4" ID tubes. Also requires 9/16" paper plugs to close shell
|
$10.50/100 |
10oz/100 |
PSC134
|
#4 Spherical shell - round plastic sets w/1/8" fuse hole
No ATFE required to purchase
Fits #4 mortar #MT134
|
$11.90/25 sets |
1lb/25 sets |
CSC5
|
#5 Cannister shell - plastic w/end caps, 1/8" fuse hole
No ATFE required to purchase
|
$11.95/25 sets |
2lbs/25 sets |
SSC100
|
#100 Spherical shell - round plastic sets, 1/8" fuse hole
No ATFE required to purchase
|
13.20/25 sets |
1lb/25 sets |
MA134
|
1 3/4" Aerial Shell w/o end discs
ATFE manufacturing permit required to purchase
Spiral wound kraft casings. Requires 1 3/4" end discs (trim to fit) not supplied w/shells
|
$5.85/dozen |
8oz/doz |
MA214
|
2 1/4" Aerial Shell w/o end discs
ATFE manufacturing permit required to purchase
|
$8.10/dozen |
1lb/doz |
|