Note: For instructions on using the shopping cart, click here.
If at any time you want to review your order so far, please click below
CONCUSSION MORTAR PROXIMITY FX
Heavy steel 3" dia X 5"
long X 1" ID, professional grade concussion mortar welded to a steel plate.
Designed for use with up to 1oz concussion powder, with or without sparkle
powders. Simply insert and secure an electric match, add powder and fire
electrically. Can also be used to fire less energetic compositions as well, such
as color flash, sparkle powders, used as a color flame projector and similar
use. Designed and built for professional use. Black matte finish.
SMOKE & MINE POTS - SHALLOW
Heavy schedule steel pots welded to
a steel base. Professional grade for frequent use. Shallow pots great for wide
spread of smoke powders or mine bags. Can also be used with other non-concussion
compositions and effects, simulated artillery hits, phosphorous simulation,
gasoline flame projections, etc.
SFXSMKS/4 - 4" diameter X 2" deep, Matte black - $24.95 - ship wt 5 lbs
High quality thermic composition specially blended to produce molten slag alloys and extreme heat in excess of 4500º F to weld metals together or cut through it like a cutting torch. The military used thermite to destroy equipment, documents and other incendiary uses as well as remote welding. Normally difficult to ignite, it can be easily ignited using thermic prime composition, thermic igniters or a small amount of potassium perchlorate and/or magnesium powder. Easily cuts through 1/8" sheet metal in seconds - heavier metals slightly longer depending on thickness. Virtually dozens of uses for camping and survival in any weather or climate. Comes with instructions. Non-hazmat shipping- No ATFE required to order.
High quality industrial thermic composition
specially blended for industrial applicatioins to cut or weld thick, heavy metals. This particular thermite is used to weld railroad rails together! It too produces molten slag alloys (in larger volume) and extreme heat in excess of 4500º F to
weld metals together or cut through it like a cutting torch. The military uses thermite to
destroy equipment, documents and other incendiary uses as well as remote welding. Normally
difficult to ignite, it can be easily ignited using thermic prime composition, thermic
igniters or a small amount of potassium perchlorate and/or magnesium powder. Easily cuts
through 1/4" steel in seconds - heavier metals slightly longer depending on
thickness. Virtually dozens of uses for camping and survival in any weather or climate.
Comes with instructions. Non-Hazmat Shipping By US Mail - No ATFE required to order.
THERMIC IGNITION COMPOSITION - HIGH EXOTHERMIC
Modified with a thermoplastic resin, this composition is moistened with denatured alcohol and pressed into pellets approx. 6-7 grams each or pressed into a prime composition (not supplied) for easy ignition and placed on top of (into) thermite or other difficult to ignite compositions. Upon ignition, combustion develops extreme exothermic, molten alloy slags and an ash that envelops/covers the reaction keeping the heat where it belongs - at the reaction zone! Very easy to use and inexpensive. One pound will make over 70 6-7 gram pellets - each one will ignite raw thermite! For those who have no prime comp, the addition of 10% (by weight) of Potassium Nitrate will also reduce the ignition point for simple ignition using matches. Hundreds of used!! There isn't another composition like it on the market! Non-hazmat shipping- No ATFE required to order.
Ready To Use Ignition Granules
Boron/Potassium Nitrate Ignition Granules, 10-60 mesh [BKNO3] - Stock # C124BKNO3 - FS
Boron, used extensively in thermic ignition compositions because of its extremely high heat of combustion, is combined with potassium nitrate (75%) and Ethyl Cellulose (1%) granulated into a flowable ignition mixture with a heat of reaction much higher than most any other ignition prime. It is used in many military devices, automotive gas air bag cartridges and other industrial use. This commercially produced igniter composition is 24% Boron for reliable ignition of most any pyrotechnic mixture. With boron prices being what they are, you cannot make it yourself at a lower cost than this, nor will you find it anywhere else at any price! Easy to use, simply press the granules into place or they can be mixed with nitrocellulose lacquer and applied. One pound goes a long way! Weight wise, there is 7000 grains in a pound. It takes as little as 5 grains per device for ignition. That means you will be able to reliably prime up to 1400 devices per pound of BKNO3! Reliable ignition for less than 2¢ each!
While supply lasts. . . . .Sold in full 10 lb cases only. . . . .Shipped by motor freight
FIRST FIRE / PRIME COMPOSITION - THERMIC
For the dozens of you requesting
a reliable prime composition without ordering several chemicals to make it, we have tested
and added a mixture of ingredients that when combined with an oxidizer (not supplied) will
provide a hot first fire reaction to ensure reliable ignition of the main charge. Either
Potassium nitrate or Potassium perchlorate may be used with it depending on the type of
composition it will be in contact with (compatibility). Add Potassium perchlorate for
priming compositions containing Ammonium perchlorate (or compositions requiring higher
combustion heat) and Potassium nitrate for others. Non-hazmat shipping- No ATFE required to order.